20000pcs per hour full PLC control 300mm or 400mm width Double-sided coating pest rat glue trap making machine
Overview
The sticky insect board machine manufactured by our company is a special equipment for the production of sticky insect board. Glue compounding, slitting, punching, and counting can be done all at once on this equipment. This equipment is easy and convenient to operate, and it is a high-speed, efficient and stable equipment.
Working principle
One roll of base material and two rolls of release paper are respectively installed on the material roll of the machine, pass through the transition wheel of the machine in turn, and the main drive rubber wheel reaches the cutting knife. Two sets of glue guns apply glue to the release paper or the silicone oil surface of the release film at the same time, and at the same time fit the substrate, the cutter cuts it into single sheets according to the set length, and completes the finished product after punching through the punching device.
Main configuration and technical parameters
| Max raw material roll width | 300mm |
| Max gluing width | 290mm |
| Max raw material roll diameter | 800mm (400-500mm is recommended for easy operation) |
| The raw material roll inner diameter of paper tube | 76mm |
| Glue tank |
80kgs |
| Total power | 18.5kw |
| Air pressure | 5-7kgs/cm2 |
| Dimension | 3330*1150*1800mm(host) + 1100*560*1050mm(glue tank) |
1. The overall size of the host: 333*115*180cm;
2. Overall dimensions of the glue machine: 110*56*105cm;
3. Counting extension cord size: 200*98.5 (including work surface) * (70-95 adjustable) cm;
4. Equipment power supply: AC380V;
5. Total power: 18.5kw (of which heating power is 15kw);
6. Standard configuration of 80 kg capacity glue melter, double gear pump, double motor and double inverter;
7. Standard Mitsubishi PLC;
8. Use Panasonic servo motor;
9. Three sets of magnetic powder clutches and inflatable shafts;
10. Three sets of ultrasonic correction systems, which can sense any color including transparent film, both transparent release film and conventional release paper can be used;
11. Maximum unwinding diameter: ¢800mm (400-500mm is recommended for easy operation);
12. Inner diameter of paper tube: ¢76mm;
13. The maximum width of the raw material roll: 300mm, and the maximum glue width is 290mm;
14. Air pressure source: 5-7kgf/cm²;
15. When producing double-sided yellow or blue insect glue board, the speed is more than 20,000 pieces per hour (without punching), and the punching speed is more than 10,000 pieces per hour;
16. It can be equipped with an automatic winding machine for the production of sticky sticky tape;
17. Other specifications can be customized.
Old model :
Video :https://youtu.be/QVwtpxt_Z1M
https://youtu.be/WEoIkmPpdmk
Our products are sold all over the world, you can rest assured.
