The Brief Of 2 Plys Paper Corrugated Board Production Line 1200mm

The Brief Of 2 Plys Paper Corrugated Board Production Line 1200mm

ZJ-F Electric Shaftless Mill RollStand Machine

Structural Features:
Symmetrical structure can be installed at the same time two bundles of paper tube, can be used for non-stop machine to change the paper
Electric o clamping, release, moving on the left and right
Brake adjustment using disc plate system.
With two-stage automatic expansion of the paper clip, clamp head size 3 inch
Technical Date:

• Paper stand active model: mechnical electrical
• Clamp paper scape : max 1200mm
• Clamp diameter : max ￠1200mm
• Single side max load weight : 1200kgs
• Power : 380 volt ,50hz
• Turn over motor power : 1.5kw /set clamp motor power : 0.75kw 4 set
• Manual brake model ( option pneumatic brake model )
• Electricla brand : DELIXI CHIT
• Machine weight : 2.3T

Mainly Purchased Parts, Raw Materials And Origin

SF-280 Vacuum Single Facer Machine

Characteristics:
Adopt the cover style adsorb structure ,match with high pressure winder , winder match with quiter ,air and electrical control centrated in the operation work table, distance with main machine1.5 m .main machine operation side all have the cover. Machine seat with wallboard all case iron , the thickness of wall board 130mm ,adopt the alone gearbox ,and gimbal transmission. Corrugated roller adopt 48 crmo ,alloy steel ,after laser hardening. Surface grinding , corugated roller diameter 280mm ,surface hardness HRC60 ,main part bear of the corrugated roller ,and pressure roller with stand high temperature. Pressure roller diameter324mm ,surfacer grinding and chormeplated ,cylinder control move up and down ,material medium carbon steel 45#,hardening and tempering (with cushioning device). Pneumatic control supply or reback the glue ,coating glue roller diameter 215mm ,surface after grinding ,carved 25 line steel pit anilox , then chorme plated , even glue roller after grinding then chorm plated . Corrugated roller ,pressure roller material suppled by zhongyuan tegang, corrugated roller single side have 0.15mm middle height, pressure roller single side 0.075mm middle height. Add the limit device. Press clycinder use diameter 160mm. Preheater diameter 320mm ,use the steamless steel ,connect by steel soft tube.
Techinical Parameter

1. Work width:1200mm
2. Operate direction :left or right ( according the cletns workshop design)
3. Design speed :80m/min
4. Temperature scale:160—200℃
5. Air compressor:0.4—0.9Mpa
6. Stear pressure:0.8—1.3Mpa
7. Corruated style (Uvstye or UVVstyle):
8. Roller Diameter Parameter:
9. Corruated roller diameter : ￠280mm
10. Pressure roller diameter: ￠324mm
11. Glue coating roller diameter: ￠215mm
12. Preheater diamter: ￠320mm

Motor Power Parameter:
Main drive power :7.5KW rated voltage:380V 50Hz contious(S1)work style
Winder power:7.5KW rated voltage:380V 50Hz contious(S1)work style