Corrugated Paper Hydraulic Mill Roll Stand
structural feature:
1.Symmetrical structure
2.adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
★Expanding head with jam, head size is 3 inch or 4 inch
※technical parameters:
1. Paper stand action model : hydraulic model
2.clamp paper scape : max 1650mm , min 900mm
3. clamp paper diameter : max 1500mm
4.single side max load paper weight : 2000kgs
5.paper main shaft diameter ￠219mm
6.air compressor work pressure (Mpa):0.4-0.8mpa
7. work power : volt 380v , 50hz
※Hydraulic system parameters:
Work pressure(Mpa):16---18Mpa
2,lifting hydraulic cylinder:￠100×440mm
3.Clamping hydraulic cylinder:￠63×1300m
4,hydraulic station motor power:5KW --380V -- 50Hz
5,solenoid valve voltage:220V 50 Hz
※Mainly purchased parts, raw materials and origin:
| Name of main parts | Brands or place of origin | material |
| Main shaft | tianggang production | diameter219mm |
| Swing arm | Production by own | Resin sand gray ironHT200 |
| wallboard | Jigang prduction | Q235AWelding parts |
| bearing | HRB,ZWZ,LYC | |
| expand chuck | Changzhou | 3,4inch shared |
| Main electrical appliance | Chit |
Our products are sold all over the world, you can rest assured.
