Automatic Carton Box Paper Card board Partition Slotter Machine
1.Partition slotter machine detailed technical parameters
1.Partition slotter Machine shape (long*width*height) 1500*1350(1550,1750,1950 )*1220
2.Partition slotter machine function
When packaging products in carton boxes, multiple products are usually placed in a carton. In order to avoid collisions between products, cardboard partitions are placed between products when placing products.
Partition slotter machine has 6 working shafts. The first pair of shafts transports cardboard. The eccentric right handle of the shaft can be adjusted according to the thickness of the board. The second pair of shafts is the grooving spindle. The right handle can be eccentrically adjusted according to the thickness of the cardboard to cut the cardboard groove. The third pair of shafts transports the processed cardboard out of the machine, and a pressure plate presses the cardboard to prevent the cardboard from being picked up by the wheel cutter. There are six more razor knives to clean out the cut paper scraps at any time to prevent the pressure and gambling from affecting production.
3.partition slotter machine all standard size we can do is 1200*300mm,1400*300mm,1000*400mm,1200*400,1400*400,1200*600,1400*600
Partition slotter machine parameters as follows : (take 1000*300mm for example)
|Partiiton slotter machine Model||1000|
|partiiton slotter Machine max speed||
|partiiton slotter Max feeding size (L×W)||1000mm×300mm|
|Partiiton slotter Min feeding size (L×W)||100mm×75mm|
|partition slotter Min slotting distance||45 mm|
|partiiton slotter Slotting number||9 groups of slotting knives|
|partiiton slotter Slotting width||
3.5mm 5mm 7mm
(Choose one according to the thickness of paperboard)
4.Partition slotter Operation and maintenance
Before connecting to the power supply, check whether the electrical system is intact and whether the motor is damp and leaking. Connect the power supply to allow the motor to run idling, and check whether the motor is running in the correct direction.
partition slotter machine Cardboard vertical board: According to the size of the processed cardboard, you can loosen the horizontal and vertical handles to align the size, and put the cardboard in flat to prevent it from being bent. Then start production.
partition slotter machine adopts bearings for rotation, which should be overhauled and cleaned every six months to a year, and filled with 2-3 calcium base grease. For other sliding parts, add 20-30# engine oil once per shift.
Before starting the partition slotter machine, check whether all parts are in good condition and whether the fasteners are loose. Always keep the surface of the worktable clean to prevent impurities from being brought into the slideway.