250pcs Multicolor Plc Printer Slotter Die Cutter

mall express package corrugated carton box multi color printer slotter diecutter

1, machine clutch

1.The electric control machine is equipped with an alarm bell, and the bell is continuously ringed during the journey to ensure the safety of the workers.

2.pneumatic interlocking device.

3.The main motor adopts frequency conversion motor, frequency conversion control, energy saving, stable start, and motor start protection device.

2, leading edge roller feeding system

 1.suction auxiliary paper feeding, - according to different bending conditions of the paperboard, the air volume can be adjusted to ensure smooth paper feeding.

2.the paper is lifted and the paper is driven by the cylinder, which is quick and labor-saving.

3.Adopt the leading edge roller feeding system.

4. the side baffle and the rear baffle position are electrically adjusted; the front baffle gap is manually adjusted.

5.Separate sheet feeding device (Continuous or sheet feeding can be selected as needed).

6. paper feed counter, set and display the production quantity. 3, dust removal device (optional)

(1) The paper brush dust removal device can remove impurities from the printing surface of the paperboard in a large amount and improve the printing quality.

4, paper feed roller

(1) The outer diameter of the upper roller is φ100 mm.

2), high quality seamless steel, wrapped with wear-resistant rubber, and balance correction.(3) , the lower roller φ124mm embossed hard chrome plated, and balance correction.(4) , the paper feed roller clearance dial is manually adjusted, the adjustment range is 0-12mm.

5, automatic zero device

(1) The paper feed unit, the printing unit, and the slotted unit are electrically reset to zero.(2) , the general carton uses the automatic zeroing device, the test prints two can be adjusted to

the correct position, reducing paperboard waste.

Host control; the motor image represents the state of the main motor switch, the current speed is displayed above,

The fixed speed is the set speed. When the host is stopped, fill in the number and open the host.

The machine runs according to the set speed. There are two kinds of [feeding mode] [continuous], click to send

Paper mode for conversion, count control; for production paper count, real count = setting

Alarm after quantity

Baffle control; left and right, up and down manual adjustment

mall express package corrugated carton box multi color printer slotter diecutter

mall express package corrugated carton box multi color printer slotter diecutter

mall express package corrugated carton box multi color printer slotter diecutter