GDJ Simple Manual Semi-Automatic Carton Box Stitching Machine
Installation requires editing
Before using the newly purchased nail box machine, you must carefully read the equipment instruction manual to understand the basic structure, performance and usage of the equipment to avoid the blindness of operation. When nailing the box, adjust the position of the main and left and right baffles and the position of the upper and lower nail heads according to the flap of the carton. When adjusting, it should be noted that the left and right baffles cannot be clamped too tightly, but the cardboard can be easily inserted and extracted easily. When the mechanical adjustment is completed, you can touch the screen to set the computer: carton height = original carton height -40mm, carton pin count, carton distance, whether to order reinforcement nails, single piece, double film selection, etc. Nail box can be made.
Production process editor
Put a piece of cardboard in the binding part by the technician according to the thickness of the cardboard, set the binding pressure, adjust the width of the nail box support according to the length and thickness of the cardboard;
When the thickness of the cardboard is too thick, the staff should be arranged to properly press the contracting place so that the paper is no longer crushed when the binding is made;
According to the requirements of the production notice, the nails should be nailed along the center of the lap joint and the deflection should not exceed 3mm.
The nail distance is even, the distance between the first and last nails is 20mm from the upper and lower lines, the single nail distance is not more than 55mm, and the double nail distance is not more than 75mm.
|Model||Stapling Speed||Stapling Thickness||Stretching Length of the holding Arm||Exterior Dimension||Weight|
|DX-600||250 s/min||3/5 ply||600 mm||1100x600x1760||300kg|
|DX-900||250 s/min||3/5/7 ply||900 mm||1400x600x1760||400kg|
|DX-1200||250 s/min||3/5/7 ply||1200mm||1700x700x1820||600kg|
|DX-1400||250 s/min||3/5/7 ply||1400mm||1900x700x1820||800kg|
|DX-1800||250 s/min||3/5/7 ply||1800mm||2300x700x1820||1000kg|