Manual Corrugated Carton Box Stitching Machine For Carton Forming Handy

Manual Corrugated Carton Box Stitching Machine For Carton Forming

Information:

The nail box machine is one of the back processing equipment of the carton. Its principle is the same as that of the ordinary stapler, but the nail box machine uses the tiger teeth as the backing plate, which is specially used for carton sealing. This series of products has the advantages of light weight, easy operation, good wear resistance, flat sealing, safe and firm, and can reduce labor intensity and improve work efficiency. It is widely used in various items that need to be loaded with heavy objects or not easily sealed with adhesive tape. Carton and calcium plastic box closure. 

Construction:

The structure of the ordinary manual nail box machine is mainly composed of a nail head, a support arm, a drive motor, a transmission clutch, a body and a foot switch. The drive motor is generally 0.5 kW, using single-stage or two-stage V-belt transmission power, and has only one speed ratio to the motor. When the motor is running, the clutch does not move when the foot switch is not pressed, the nail head is not nailed, the nail box is needed, the cardboard is manually held, the switch is switched off, the nail head is actuated, and the nail is cycled. The more complicated part of this type of machine is the nail head and mechanical clutch. The most important part in the nose is the punch. As the punch reciprocates up and down, in a very short time (about half a second), the incoming line (including shearing) is pressed, pressed, and suspended. The design travel speed, acceleration and dwell time are different, the time required and the consumable parts are different, which brings difficulties to the manufacturer. The current reciprocating mechanism of the punch has three forms: a cam, an eccentric wheel and an eccentric shaft. The cam type is also called the groove wheel type. The disadvantage is that the machining is slightly difficult. The parts of the machine head are relatively more. Some wearing parts are small in material, but the steel must also be selected. The corresponding heat treatment process is used to improve the endurance and prolong the use. life. Regular maintenance should always be lubricated and kept clean. When purchasing such machines, the main thing is to look at the nail head and body of the manufacturer.

Main Parameter