Fully Automatic Electric 5 Layer Corrugated Board Production Line 1600mm Type
12, computer spiral knife cross cutting machine: 1 set
The machine is composed of a paper cutting part, a conveying part, an output part, an electric control part, a lubrication part, a frame part and the like.
The cutter shaft diameter of the paper cutting part is 240mm
The conveying output part is controlled by a separate 2.2KW speed regulating motor, which is adjusted with the conveying slitting machine, bonding machine and coating machine.
The electronic control part is composed of 11KW servo motor and corresponding control.
All the gears of the cross-cut paper are ground to ensure the transmission precision and various fatigue resistance of each transmission part.
13, semi-automatic delivery:
The delivery machine conveys the cut cardboard through the plate conveying device, thereby improving work efficiency and being easy to stack. (suitable for uniform production and avoid errors.
14, transmission department: 1 set
A total of 7 transmission points are variable frequency speed regulation.
1. All the bachelor surfaces of the equipment are plated with hard chrome
2 There are 7 transmission points in the line, glue applicator, bonding machine and conveying slitting machine. The motor and all the rubber rollers of the equipment are guaranteed not to be degummed within one year.
3, the equipment all bearings three packs a year
4. The equipment does not contain wires, pneumatic lines or air pumps.
Guide the maintenance and application of corrugated board production line equipment according to the performance, characteristics and use of lubrication technology
The high-temperature grease is made of a composite soap thickened semi-synthetic lubricating oil, and is added with a structure improving agent, an antioxidant additive and a special anti-wear additive.
2. Performance characteristics
Excellent high temperature performance and oxidation stability, prevent high temperature deterioration of grease, ensure high temperature and long-term normal operation of lubrication parts; excellent adhesion performance, good mechanical stability and colloidal stability, ensuring no loss in lubrication parts; good Lubricity, protect bearings from wear and tear; excellent overall performance to ensure long bearing life.
|Design speed:100m/min||Normal work speed:60-80m/min|
|1||Mill roll stand||5||Electric swing|
|2||Railing and tracks||10|
|3||Single facer||2||Corrugating roller ￠280mm, electric adjust gluing width, pneumatic control|
|4||Pre-heater||2||￠600mm, electric adjust wrapping angle|
|5||Pre-conditioner||2||￠600mm electric adjust wrapping angle|
|6||Bridge conveyer||1||Adsorption type, electric deviation-correcting|
|7||Triplex pre-heater||1||￠600mm electric adjust wrapping angle|
|8||Gluing machine||1||Pneumatic adjust pressing roller|
|9||Double facer||1||Heating plants: 520mm×16, with cooling section|
|10||Slitter scorer||1||5 blades with 8 scorers|
|11||NC cutoff||1||Helical knives Blade made in Taiwan|
|12||Cardboard feeing machine||1|
|14||Glue making system||1||Automatic circle glue, pipeline provided by buyer|
|16||Steam system||1||Pipeline on valves provided by buyer|