Fully Automatic 3 Ply Corrugated Board Production Line 1800mm Size
7. Gluing machine: 1 set
The coating machine has three sets of glue coating devices, which are driven separately. The transmission motor is 3 sets of 2.2KW, and the frequency conversion motor is regulated. The specific structure is that the rubberizing roller has a diameter of 215 mm, the surface is ground and processed, and the mesh is pressed, which is advantageous for uniformly feeding the rubber to the rubberizing roller to make the rubber coating uniform.
The rubberizing roller and the rubberizing roller are provided with an adjusting mechanism to effectively control the amount of glue, so that the coating amount of the machine is more uniform and reliable. The platen shaft is provided with a pneumatic adjustment device.
The other paper guide rollers are all plated with hard chrome to prevent corrosion of the rubber surface.
8, bonding machine: 1
The machine is composed of upper and lower rubber rollers, pressing device, transmission device, frame device and the like.
The machine is a device in which the glued paper sheets are bonded together, and the pressure can be appropriately adjusted according to the type of the paper and the relevant conditions.
The diameter of the upper and lower rubber rolls is set to 400 mm, and the wall thickness of the roll body is 20 mm, which prevents deformation of the roll body during pressurization.
9, dryer: 1 set
The dryer is provided with 5 meters and 5 sets of electric heating and drying devices. The drying roller has a diameter of 240 mm, and the surface is plated with hard chrome and pneumatically pressurized.
10, cooling device: 1 set
The cooling device is set to 7m8 group, including upper and lower fan cooling and setting device, frame, guide roller device and pressure roller device.
11, conveying slitting machine: 1 set
The machine is composed of a conveying unit, a paper separating unit, a pressing device, a frame portion and a transmission unit.
The conveying is to send the bonded paper to the cutting machine at a uniform speed and then send it to the cross-cutting machine to make the cross-cut even and accurate.
There are three slitting knives in the separation section, which can be cut and cut.
|Design speed:100m/min||Normal work speed:60-80m/min|
|1||Mill roll stand||5||Electric swing|
|2||Railing and tracks||10|
|3||Single facer||2||Corrugating roller ￠280mm, electric adjust gluing width, pneumatic control|
|4||Pre-heater||2||￠600mm, electric adjust wrapping angle|
|5||Pre-conditioner||2||￠600mm electric adjust wrapping angle|
|6||Bridge conveyer||1||Adsorption type, electric deviation-correcting|
|7||Triplex pre-heater||1||￠600mm electric adjust wrapping angle|
|8||Gluing machine||1||Pneumatic adjust pressing roller|
|9||Double facer||1||Heating plants: 520mm×16, with cooling section|
|10||Slitter scorer||1||5 blades with 8 scorers|
|11||NC cutoff||1||Helical knives Blade made in Taiwan|
|12||Cardboard feeing machine||1|
|14||Glue making system||1||Automatic circle glue, pipeline provided by buyer|
|16||Steam system||1||Pipeline on valves provided by buyer|