60-600mm automatic CNC paper tube forming machine
1. By adjusting the foot of the bottom of the console to achieve the level of stability of the machine.
2. The host two adjustable pedestal arm below each of the three spherical support column, thereby increasing the stability of the swing arm, reducing the lower drive bearing single-sided force, thereby enhancing the service life of parts.
3. The operation of the two mainframe design more humane, the operator in the paper orientation and the direction of machine operation can easily control the speed of the machine, this function in the machine during the production of paper can be timely deceleration or downtime and reduce waste.
4. Inverter for the An Ruitai products, this product is well-known brands, the practical value is relatively high, low failure rate, repair rate is small. By frequency control motor to achieve the machine speed adjustment.
5.PLC control system for the dedicated product, the system response fast, accurate data processing, good stability, anti-interference ability, with the professional tracking servo together constitute a perfect combination.
6. The man-machine interface is a special-purpose product that can input paper width, paper tube diameter, cutter distance, tube cutting system and paper tube length through the man-machine interface. The control system will automatically calculate the result and realize the speed of tube winding and cutting speed Cooperation.
|Size (mm)||Drop tube rack||automatic|
|Host Size: L * W * H||2900mm*1700mm*1900mm||Belt adjustment||Manual|
|Land area: length * width||20000mm*9000mm||For glue||Automatic stainless steel heating plastic tank|
|Hub diameter||294mm||Tape for lubrication oil||Automatic lubrication of stainless steel basin|
|Hub height||360mm∕430mm||Tension adjustment||Mechanical adjustment|
|Minimum track||1000mm||Paper holder type||Right-angle fixed lifting on the paper holder|
|The maximum track||1250mm||Roll mandrel||1|
|total weight||4500kg||Roll tube belt||1 article|