Semiautomatic large pinion paper waste stripper,Carton waste clearance tool
This scrapping machine is suitable for the waste edge removal of cardboard, fine corrugated and ordinary corrugated paper in the printing industry. Applicable paper range: 200g/ m2 or more cardboard, gray cardboard, single/double pit paper, pitted paper
Instructions for use
Pneumatic stripping machine (small teeth): used for book paper, cardboard, fine pit products and paper scraping less than 5MM products.
Pneumatic stripping machine (medium tooth): used for paperboard, fine pit, double pit corrugated paper products.
Pneumatic stripping machine (large teeth): used for fine pits, rough pit corrugated boxes, and stripping of cardboard products.
1.The waste disposal machine is a pneumatic tool used for the waste edge removal of cardboard, fine corrugated and ordinary corrugated paper in the printing industry. It can replace the manual hammer to eliminate waste, improve work efficiency and shorten the waste elimination cycle.
2.Pneumatic stripping machine consists of: Taiwan pneumatic motor, hand-held pneumatic switch and high-hardness chain claw rotary motion mechanism
3.Pneumatic waste stripping machine principle: The compressed air after drying passes from the handle tail joint through the manual control valve and the sliding air valve into the start deceleration motor, which drives the air motor to output a stable torque, and then drives the high-hardness chain claw to rotate rapidly. The gripper is caused to grip.
4.Pneumatic stripping machine effect: After punching and unloading according to the carton unfolding pattern, the remaining surrounding waste is removed by the fast moving gripper, which can replace the hammer hitting and the manual incision in the domestic carton factory. And effectively improve the quality of the carton.