Full Servo Flexo 1800mm Corrugated Board Printing Machine

Full Servo Corrugated Pizza Box Flexo Printing Machine Carton Box Making Machine

the paper feeding department

machine clutch

1)The electric control machine is equipped with an alarm bell, and the bell is continuously ringed during the journey to ensure the safety of the workers.

2) The transmission shaft is equipped with a safety clutch to avoid malfunction and damage the machine (the main engine cannot start running when the machine is not locked).

3) Pneumatic interlocking device.

4) The main motor starts the protection device.

2, leading edge paper feeding system

1) 7.5 kW fan, suction auxiliary paper feeding, according to the degree of bending of the paperboard, the air volume can be adjusted to ensure smooth paper feeding. Frequency Control ,

2) Side gear electric adjustment, pneumatic alignment, PLC control, touch screen input digital automatic adjustment, convenient and quick adjustment.

3) Taiwan's super-resistant leading edge paper feed roller, durable wear.

4) Paper feed counter, set and display the production quantity. Touch screen display

3. Dust removal device

It is equipped with a high-quality brush and 4 kW fan to vacuum, which can remove impurities on the printing surface of the board and improve the printing quality.

4, paper feed roller

1) The outer diameter is φ155mm. Quick adjustment device

2) Seamless steel pipe, wrapped with wear-resistant rubber, and balance correction.

3) The lower paper feed roller is chrome plated.

4) The paper feed roller gap is manually adjusted, and the adjustment range is 0-11mm. Accurate signage display.

5, automatic zero device

1)The paper feed section, printing section, slotted section, and die-cut section are

automatically zeroed.

2) The automatic carton is used in the general carton, and the test prints can be adjusted to

the correct position to reduce the waste of the cardboard.

6. The front end of the paper feeding part is equipped with a 10-inch touch screen, which controls the front bezel adjustment, the main machine action, the ink level control, the printing plate control, realizes the one-button paper feeding mode, does not repeat the ink, does not print blank, and avoid the control Some cumbersome controls such as the version. The paper feeding part, the printing part, the die-cutting part, and the separate zero-return control generally adopt a positioning and hanging test to print a piece of cardboard to achieve a qualified product.