Fully Automatic 3 Ply Corrugated Cardboard Production Line 1600mm Type
Main technical parameters and requirements in production line
Type:WJ1600-I type three layer corrugated paperboard production line:
The maximum production width of the corrugated cardboard:1600mm
Design speed:100m/min
Economic speed:60-80m/min
note:Production line speed test paper should meet the following requirements:(the surface temperature of the equipment is not less than 172℃)
﹡Paper rating of not less than B grade ﹡Paper moisture content of about:11%±2%
﹡top paper:100—250g/m2 ﹡core paper:100--250g/m2
﹡corrugated paper:100—200g/m2
1,Flute-type combination:A ,C, B, E(as customers’ requirement)
2,Steam the necessary requirements:
﹡amount of steam 2500—3000Kg/Hr ﹡the highest pressure:1.2Mpa
﹡common pressure:0.8-1.1Mpa
6,power supply:380V 50Hz Three-phase four-wire system
7,equipment installed total power:about120KW
The actual power consumption:about 60KW(full speed)
8,equipment covers:about46m×10m×5m(Specific length of foundation Figure prevail)
9,Equipment out of paper orientation:According to the user to determine the transmission plant set left or right position
10,Equipment applicability,Available in A, B, C class domestic or imported paper Paper
Parameter
| specification | Equipment name | UNIT | QTY | Unit price(Ten thousand yuan) | Remark |
| ZJ-F | Electric shaftless mill roll stand | a | 3 | 3.6 | expand chuck,manual dics brakes,Mechanically - actuated lift,panning left and right on the middle |
| Paper trolley | a | 6 | track length6000mm,trolley used 10mm medium plate welding. | ||
| RG-1-600 | Top paper preheater | a | 1 | 2.2 | roller￠600mm,including pressure container certificate.Electric adjustment wrap angle.Wrap angle can adjust the paper preheat area in the range of 360°. |
| RG-1-600 | Core paper preheater | a | 1 | 2.2 | roller￠600mm,including pressure container certificate.Electric adjustment wrap angle.Wrap angle can adjust the paper preheat area in the range of 360°. |
| SF-280S | Corrugated single facer | a | 1 | 13.6 | Corrugated main roller￠280mm,material with 48CrMo alloy steel,independent gearbox,universal joint transmission structure. |
| RG-2-600 | Double preheater | a | 1 | 4.4 | roller￠600mm,including pressure container certificate.Electric adjustment wrap angle.Wrap angle can adjust the paper preheat area in the range of 360°. |
| GM-12 | Double glue machine | a | 1 | 5 | Glue roller diameter 215mm.Each independent frequency motor drive, manual adjustment glue gap. |
| DF | Conveyor bridge | set | 1 | 8 | 200mm main beam channels, independent inverter motor drive pull paper feed, adsorption tension. |
| SM-10 | Double facer | set | 1 | 35 | Dryer section 9 heating plate, pneumatic lifting roller, using intensive pressure roller. |
| ZQS | Thin knife slitting | set | 1 | 6 | Electric thin blade,electric detuning,five knives eight lines, blade with tungsten alloy steel making. |
| NC-120 | NC cutter helical knives | a | 1 | 17 | Full AC servo control, energy storage brake, helical blade structure, oil-immersed gears,10.4-inch touch screen display. |
| DMT-120 | Paper sheet delivery and side conveyor | a | 1 | 5 | Electric adjustment cardboard size, pneumatic control transverse output paperboard. |
| ZJZ | Glue station system | set | 1 | 4 | Customer-owned pipeline.glue device respectively carrier pot,main pot,storage pot,and send glue pump,back glue pump. |
| QU | Gas source system | a | 1 | Including 0.6m³gas tank 1 unit.Air pump,pipeline is prepared by the customers. | |
| ZQ | Steam system | set | 1 | 2 | Including within equipment pipelines valve,traps,meter and steam elements,customer-supplied heat and piping. |
| DQ | Electrical control cabinet system | set | 1 | Electrical control system: the whole line speed regulation institutions adopts frequency conversion motor.Electric cabinet surface electrostatic spraying paint, wear resistance and beautiful.Main contactor main relay adopt famous brand product. | |
Our products are sold all over the world, you can rest assured.
