1600mm Electric Heating Single Face Corrugated Board Production Line
1.Main Features for Single facer corrugated board Production Line
1)This machine was top-style vacuum absorption.It can avoid high or low corrugation which can make good quality of corrugated paperboard.
2)It can automatically and reducing offering glue. Pneumatic dealing with corrugated board. Corrugated rollers are cut and polished by special mixture of metal.
3)The whole fears are temperature the hardness readers HRC 55-60.
4.)The main axis is lubricated bu high-temperature wed oil. It is sealed up well and can lubricated effectively.
5)The economic speed is 30-40 meters/min.
6)Above machines are equipped double circles for normal user to choose.
2. What is the Single facer corrugated board production line used for ?
Single Facer is the main machine for producing the corrugated paperboard. make single face corrugated board from flat craft paper Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
Note : This machine can also make 3 layer 5 layer 7 layer when work together with gluing machine and pressing machine
3.What is the main structure for Single facer group and working principle ?
This line including paper mill roll stand and single facer machine
Step one : Make craft paper to mill roll stand
Step two :Heat the corrugated layer by heating shaft
Step three :Make the flat paperboard to corrugated board by corrugated shaft
Step Four : Gluing top wave by glue shaft and make this two pieces paper to monolayer corrugated board
4.SIngle facer corrugated board production line specification
1) Design Speed :100m/min
2)Design Width :2000mm
4)Pressure of compressed air supply :0.4-0.9mpa
5)Pressure of steam :0.8-1.3Mpa
6)Corrugating type :UV or UVV
|Diameter of rollers
1) Corrugating roller :280mm
2)Pressure roller :284mm
3)Gluing roller :215mm
4)Pre-heater roller :320mm
|Electrical Parameters of motors
1)Main drive motor :7.5KW
2)Air suction motor :7.5KW
3)Glue reducer motor :100W
4)Gluing roller gap adjusting motor :250W
5)Glue pump motor :2.2KW
5.Whole machine view
6.Finished corrugated paper made by Single facer corrguated board production line