Mini Type Corrugated Box Printing Machine 4 Color slotter Die Cutter
1,Corrugated Box Printing Machine Description:
This printing machine has a well-adjusted humanized design, and it only takes a short time for the user to perform preset, fine-tuning, execution, replacement and memory functions conveniently.
The process is smooth and unimpeded, saving a lot of time and energy, and the operation is easy and smooth. In order to make the interface clear, intuitive and easy to understand, all operations are clearly presented to users with appropriate data.
This equipment occupies a small area, is easy to maintain and saves a lot of manpower, especially suitable for the production of standard cartons.
2,Corrugated Box Printing Machine Specifications:
Project unit type | 950*1950mm |
Wall panel inside width mm | 950*1950mm |
Maximum paper area mm | 950*1950mm |
Minimum paper area mm | 360*640mm for slotter box Any size for die cutter box |
Effective printing mm | 950*1950mm |
Printing plate thickness mm | 3-8 |
Maximum speed Sheets/min | 180 |
Economic speed Sheets/min | 140-150 |
Main motor power KW | 4.0 |
Color registration accuracy mm | Four-color ±1 |
Slotting accuracy mm | ±1.5 |
Wall panel thickness mm | 40 |
3,Corrugated Box Printing Machine Feature Advantage:
Paper Feeding Section Front Edge Printing The Same Group ( not independent type )
The electric control machine is equipped with an alarm bell, and the bell is continuously ringed during the journey to ensure the safety of the workers.
Pneumatic interlocking device.
The main motor adopts frequency conversion motor, frequency conversion control, energy saving, stable start, and motor start protection device.
Suction auxiliary paper feeding, - according to different bending conditions of the paperboard, the air volume can be adjusted to ensure smooth paper feeding.
The paper is lifted and the paper is driven by the cylinder, which is quick and labor-saving.
Adopt the leading edge roller feeding system.
The side baffle and the rear baffle position are electrically adjusted; the front baffle gap is manually adjusted.
Separate sheet feeding device (continuous or sheet feeding can be selected as needed). (6), paper feed counter, set and display the production quantity.
The paper brush dust removal device can remove impurities from the printing surface of the paperboard in a large amount and improve the printing quality.
The outer diameter of the upper roller is φ100 mm.
High quality seamless steel, wrapped with wear-resistant rubber, and balance correction. (3), the lower roller φ124mm embossed hard chrome plated, and balance correction.
The paper feed roller clearance dial is manually adjusted, the adjustment range is 0-12mm.
The outer diameter is φ292mm (including the outer diameter of the plate is φ300mm).
The surface of the steel pipe is ground and hard chrome plated.
Do balance correction, and run smoothly.
Loading and unloading the printing plate, the electric control of the foot switch is reversed.
The outer diameter is φ124mm.
The surface of the steel pipe is ground and hard chrome plated.
Do balance correction, and run smoothly.
Manual adjustment of the printing roller gap dial, the adjustment range is 0-12mm.
Upper roll: Thick-walled steel pipe with outer diameter of φ71mm, equipped with four paper
Feed rings.
Lower roll: Outer diameter of φ124mm thick-walled steel pipe, surface grinding, hard chrome plating.
The paper feed roller clearance dial is manually adjusted, the adjustment range is 0-12mm.
The outer diameter is φ156 mm.
The surface of the steel pipe is ground, pressed netting, hard chrome plating.
Do balance correction, and run smoothly.
The number of nets is 180, 200, 220, 250, 300.
With the paper feeding system pneumatic automatic lifting device. (the anilox roller is lowered in contact with the plate during paper feeding, and the anilox roller is lifted and separated from the plate when the paper feed is stopped).
The anilox roller is equipped with a wedge type overrunning clutch, which is convenient and quick to disperse ink and wash ink.
The outer diameter is φ142 mm.
The surface of the steel pipe is wrapped with wear-resistant rubber, and the balance is corrected.
The rubber is high in special grinding, and the ink transfer effect is good.
Phase adjustment mechanism
Planetary gear construction.
Printing phase electric digital 360 ° adjustment. (operation and stop can be adjusted)
Manually adjust the lateral position, adjust the distance a total of 10mm
8, ink circulation
Pneumatic diaphragm pump, stable ink supply, easy operation and maintenance.
Ink filter, filter impurities.
Phase control; the current value represents the longitudinal position of the printing roller. After adjusting the value input data, press the left or right button, the printing roller will stop to the left or right to the input data position; the horizontal control: the left and right pull version is manually adjusted and stable.
4,KSPACK Group:
Hebei Jinguang Packing Machine Co.,Ltd
Cangzhou Kingsun IMP and EXP Co.,Ltd
Dongguang BaiYing Carton Machinery Co.,Ltd
5,KSPACK Brief Introduction:
We are a professional supplier of corrugated machinery,including automatic high speed flex printer slot die cutters,corrugated board production lines,Rotary die cutters, carton staplers and two ply corrugated board production lines.Along with our development,we have set up our own factories. We are now enlarging our product area to testing equipment and other kinds of packaging machinery. We have rich experience and expertise in the field of corrugated machinery, and we can provide customized solutions for different customers’ needs. We are committed to delivering high quality products and services with competitive prices and timely delivery.