|Key Word:||Single Facer||Advantage:||360 Degree Rotate , More Stable|
|Roller Heated-treatmen:||Hardness HRC56-60||Flute Type:||A, C, B, E, For Option|
|Upper-lower Corrugating Roller:||48CrMo High Quality Alloy Steel||How To Adjust Glue:||Electric|
1800mm single facer machine,
2000mm single facer machine,
universal joint single facer corrugated machine
Electric Heating SF 280 Corrugated Paperboard Single Facer With Universal Joint
1. Main Features for Universal joint single facer
1) Speed is higher than common design , more stable and durable
2) Corrugated roller are made of 48CrMo high quality alloy steel, with heated treatment.
3) The corrugating rolls, pressure roll and glue roll are adopted with high stability of the airbag control system, also with pneumatic control buffer effect.
4) Adopt glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for gap between glue roll and doctor roll.
5) The moveable type glue unit is convenient to clean and maintain.
6) Easy operation control system. Touch screen with colorful drawing display operation state, easy and simple to handle.
7) Built-in per-conditioner with production spraying device for the medium moisture and temperature adjustment.
8) Bearing for corrugated rollers, and pressure roller adopt high-temperature lubricate grease to keep running smoothly and durably.
2. What is the main structure for Single facer Production line and working principle ?
This line including paper mill roll stand and single facer machine and rotary sheet cutter
Step one : Make craft paper to mill roll stand
Step two :Heat the corrugated layer by heating shaft
Step three :Make the flat paperboard to corrugated board by corrugated shaft
Step Four : Gluing top wave by glue shaft and make this two pieces paper to monolayer corrugated board
Step Five : Cross cutting the corrguated paper to the size you want
Optional Function : Rewinder the finished corrugated paper to paper roll again
3. What is the Single facer corrugated board production line used for ?
Single Facer is the main machine for producing the corrugated paperboard. make single face corrugated board from flat craft paper Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
Note : This machine can also make 3 layer 5 layer 7 layer when work together with gluing machine and pressing machine
4.SIngle facer corrugated board production line specification
1) Design Speed :100m/min
2)Design Width :2000mm
4)Pressure of compressed air supply :0.4-0.9mpa
5)Pressure of steam :0.8-1.3Mpa
6)Corrugating type :UV or UVV
|Diameter of rollers||
1) Corrugating roller :280mm
2)Pressure roller :284mm
3)Gluing roller :215mm
4)Pre-heater roller :320mm
|Electrical Parameters of motors||
1)Main drive motor :7.5KW
2)Air suction motor :7.5KW
3)Glue reducer motor :100W
4)Gluing roller gap adjusting motor :250W
5)Glue pump motor :2.2KW
5.Clients come to our factory to check single facer machine
6.Whole machine view
Contact Person: sunny