|Machine Name:||KSJ-1600 Type Flexo Printing Die Cutting Automatic Corrugated Box Machine Computer Adjustment||Color:||White Color|
two color flexo printing machine,
carton box making machine
KSJ-1600 Type Flexo Printing Die Cutting Automatic Corrugated Box Machine Computer Adjustment
【1】 electric control machine from the alarm bell, continuous ringing warning, to ensure the safety of workers.
【2】 drive shaft with friction clutch, to avoid misuse and damage to the machine.
【3】 pneumatic interlock device.
【4】 The host motor starts the protection device. (The machine is not locked, the host can not start running)
2 . leading edge roller type feeding system
【1】 suction auxiliary feeding paper fan 7.5KW, according to the different bending conditions of cardboard, air volume adjustment,
To ensure smooth paper supply. Use the brush to remove the cardboard surface
Dust, scraps of paper and other debris, improve the printing quality.
 slotted with a chain control switch, control emergency stop paper.
【3】 The paper lift and down adopt the air cylinder ,the action quickly, effort.
 the use of Shandong "Komori" front edge roller feed system, simple operation, high precision. The amount of extension can be adjusted, raw
Strong adaptability. Speed transmission more stable, suitable for warping, thin cardboard transmission, the effect is obvious.
【5】 side baffle, rear box position by the screw electric adjustment; front baffle upper and lower gap position manually synchronized adjustment.
【6】 skip feeding device (according to the need to choose continued or sheet feeding).
【7】 PLC control, man-machine interface, menu storage, printing plate correction, printing speed, quantity, time and the Department operation
3 Feed roller
【1】 up roller use the soft rubber shaft ,so when feed the board ensure the not borken the board Diameter 132mm, wearing rubber shaft , make the blance correct ,keep the paper feed steay and accurate.
【2】 The lower feed roller with embossing roller diameter ¢ 155 mm, seamless steel pipe, embossed hard chrome plating.
【3】 feeding roller cross slider-type dial dial manually adjust the adjustment range of 0 ~ 12 mm. Adjustment does not affect the gear gap, to ensure transmission accuracy.
【4】 hand-type quick clearance fine-tuning self-locking device.
4 automatic zero device
【1】 The paper feed section, the printing section, and the slotted part are automatically reset to zero.
 General carton use automatic zero device, try to print two can be adjusted to the correct position to reduce cardboard waste.
|Name of parameter||KSJ-900||KSJ-1200||KSJ-1400|
|Color Group||Everything can be quipped according to users’ needs|
|Printing Paper||A,B,C,A/B,B/C and A/B/C Corrugated Cardboard(Maximum gap 11mm)|
|Production Speed||180 Pieces/min||170 Pieces/min||160 Pieces/min|
|Economic Speed||170 Pieces/min||160 Pieces/min||150 Pieces/min|
|Standard Printing Plate Thickness||7.2mm|
|Slot Width x Max.depth|
7mmx220mm 7mmx300mm 7mmx350mm
(Number of blade and slot depth may be added)
|Printing Roller Dia||300mm||408mm||480mm|
Contact Person: Liu