|Name:||Automatic 5 Ply Corrugated Board Production Line Speed 60-80m / Min||Color:||White|
|Degree Of Automatic:||Automatic||Keyword:||Corrugated Board Production Line|
|Function:||Making Corrugated Cardboard||Service:||1 Year Warranty|
corrugated carton production line,
corrugated cardboard production line
Automatic 5 Ply Corrugated Board Production Line Speed 60-80m / min
1, paper machine:
Hydraulic shaftless paper holder: 2 sets
Through the hydraulic transmission mode, the clamping, lifting and automatic correction system of the paper roll is realized. The hydraulic station adopts the production of Shandong Zaozhuang, the air drum brake, the expansion chuck, and the top paper device to meet the needs of the paper core. 3 inches, 7 inches.
2, 4 paper carts
The paper rails are 6 meters long and double channel steel butt joints. The trolleys are driven by steel plates and optical shaft iron rollers. The paper is stable and easy to operate.
3, flyover conveyor: 1 set
The flyover conveyor comprises a platform device, a guardrail device, a roller device, and a frame device.
The guide rollers in the overpass conveyor are all 86mm in diameter, chrome-plated on the surface, and the coating reaches 2 filaments. The frame is made of 140 (national standard) channel steel to maintain the stability of the frame. The upper part of the paper machine is equipped with a guide roller to facilitate paper feeding.
5, the edge machine: 1 set
The opposite side machine consists of a 4-layer frame, a paper guide roller with a 104mm chrome-plated roller, a center swing roller diameter of 86mm, a pair of side systems using a hydraulic oil and gas station, and a transmission device.
The main function of the edge machine is: automatic control of the edge, alignment, and edge error: ± 1mm.
6, four online: 1 set
The four wires are composed of four hot rollers with a diameter of 400 mm and a frame, a paper guide roller, a heating device, a distance device, a transmission device and the like.
The heating device is temporarily designed as an electric heating device.
The guide roller has a diameter of 86 mm.
The surface of the heated roll is ground and hard chrome plated.
The temperature of the surface of the heat roller is made uniform. The water content of the base paper before entering the glue applicator is basically the same.
|Design speed:100m/min||Normal work speed:60-80m/min|
|1||Mill roll stand||5||Electric swing|
|2||Railing and tracks||10|
|3||Single facer||2||Corrugating roller ￠280mm, electric adjust gluing width, pneumatic control|
|4||Pre-heater||2||￠600mm, electric adjust wrapping angle|
|5||Pre-conditioner||2||￠600mm electric adjust wrapping angle|
|6||Bridge conveyer||1||Adsorption type, electric deviation-correcting|
|7||Triplex pre-heater||1||￠600mm electric adjust wrapping angle|
|8||Gluing machine||1||Pneumatic adjust pressing roller|
|9||Double facer||1||Heating plants: 520mm×16, with cooling section|
|10||Slitter scorer||1||5 blades with 8 scorers|
|11||NC cutoff||1||Helical knives Blade made in Taiwan|
|12||Cardboard feeing machine||1|
|14||Glue making system||1||Automatic circle glue, pipeline provided by buyer|
|16||Steam system||1||Pipeline on valves provided by buyer|
Contact Person: wendy